Showing 85 items matching train guards
-
Wodonga & District Historical Society Inc
Functional object - Victorian Railways Guard's Satchel c. 1970s, c. 1970s
... train guards... until he became a locomotive train driver in 1987, when guards ...The leather satchel with printed information and equipment including instruction manuals, report sheets, rubber stamps and books was issued to Barry Ryan when he started working as a guard for Victorian Railways in Wodonga in 1972. It was in use until he became a locomotive train driver in 1987, when guards no longer worked on the trains.The leather satchel has local significance as it was used by a guard on the Victorian Railways in Wodonga and the railway was an important factor in the development of Wodonga. It also has state significance as part of the Victorian railways equipment for train guards, and is representative given that it's a complete kit with the green signal flag, lamp and the instruction manuals, report sheets, rubber stamps and books in the satchel.Brown leather Victorian Railways guard's satchel, with a leather handle and shoulder strap. There is a rolled up green signal flag attached behind the handle on the top and a dark blue metal lamp attached to the front of the satchel. The lamp has a green filter in front of the bulb, so it would emit green light. The raised letters "V.R." are located on the front and top surfaces of the blue metal lamp, and the number "2749" is engraved on the back surface. The name "B. RYAN" is engraved in the front surface of the lamp. The number "2544' is stamped into a brass plate on the front of the satchel. There is a semi-circular red painted iron disk hinged to the front of leather satchel with a cut out area in the centre to show the number on the brass plate. The lamp is attached to lower rim of the semi-circular red painted iron disk. Inside the leather satchel there are instruction manuals, report sheets, rubber stamps and books relating to the work as a guard on the Victorian railways, as the satchel was used by the donor Barry Ryan when he started working as a guard for Victorian Railways in Wodonga in 1972. "V.R." in raised letters on the front and top surfaces of the metal torch. "B. RYAN" engraved in the front surface of the torch. "2749" engraved into the back surface of the metal torch. "2544" stamped into the surface of the brass plate on the front of the leather satchel. victorian railways, v.r., victorian trains, trains, train guards, leather satchel, satchel, wodonga -
Stawell Historical Society Inc
Photograph, Joel Railway Station 1931
... train and Guards Van... 7/1/1931. Looking South with mixed train and Guards Van ...Joel Railway Station 7/1/1931. Looking South with mixed train and Guards Vantransport, railways -
Wodonga & District Historical Society Inc
Functional object - Railway Signal Lamp, 1917
... for communication, safety and lighting by train guards, shunters... for communication, safety and lighting by train guards, shunters ...Metal and glass railway signalling lamps were used for communication, safety and lighting by train guards, shunters and signalmen, as well as station staff in the late 1880s to the early 1900s. They were hand operated and used fuel such as kerosene.The railway signal lamp has local significance as part of a set of three lamps donated by a resident of Wodonga who worked for the Victorian Railways. It also has national significance as an example of communication and safety equipment used by the railways in Australia in the late 19th century and early 20th century.Black painted metal signal lamp with a circular metal cover over a clear glass disk at the front and an elongated oval shaped handle at the back. The circular metal cover has a vertical slit in it. There is an inscription on the top of the lamp with the date 1917 and the company name "Eli Griffiths & Sons, Birmingham"."ELI GRIFFITHS & SONS / 1917 / BIRMINGHAM"railway lamps, signalling lamp, train signal lamps, railway equipment -
Wodonga & District Historical Society Inc
Functional object - Railway Signal Lamp, c. late 1800s - early 1900s
... for communication, safety and lighting by train guards, shunters... for communication, safety and lighting by train guards, shunters ...Metal and glass railway signalling lamps were used for communication, safety and lighting by train guards, shunters and signalmen, as well as station staff in the late 1880s to the early 1900s. They were hand operated and used fuel such as kerosene.The railway signal lamp has local significance as part of a set of three lamps donated by a resident of Wodonga who worked for the Victorian Railways. It also has national significance as an example of communication and safety equipment used by the railways in Australia in the late 19th century and early 20th century.Exterior casing of a black painted metal railway signal lamp with circular blue and red glass filters and a turning mechanism on the top under a circular handle. Small copper plate with the letters "A y" stamped on it, on one side of the lamp. "A y"railway lamps, signalling lamp, train signal lamps -
Wodonga & District Historical Society Inc
Functional object - Railway Signal Lamp, 1901
... used for communication, safety and lighting by train guards... used for communication, safety and lighting by train guards ...These types of metal and glass railway signal lamps were used for communication, safety and lighting by train guards, shunters and signalmen, as well as station staff in the late 1880s to the early 1900s. They were hand operated and used fuel such as kerosene.The railway signal lamp has local significance as part of a set of three lamps donated by a resident of Wodonga who worked for the Victorian Railways. It also has national significance as an example of communication and safety equipment used by the railways in Australia in the late 19th century and early 20th century.Black painted metal signal lamp with a clear glass lens secured at the front and one thin elongated oval shaped handle showing at the back. The metal appears to be tin plated iron under the black paint layer. There is an oval plate with an embossed inscription on the proper left side of the lamp that is partly covered by the door at the front which holds the clear glass lens. The inscription includes the date 1901."...NARIPPINGILLE STOVE / CO LTD 1901 / PATENT...S & / ...NUFACTURERS / RMINGHAM" on an oval shaped plate on the proper left side, which is partly covered by the door with the clear glass lens.railways wodonga, victorian railways -
Wodonga & District Historical Society Inc
Functional object - Set of Three Railway Signal Lamps, c. late 1800s - early 1900s
... were used for communication, safety and lighting by train... were used for communication, safety and lighting by train ...These types of metal and glass railway signalling lamps were used for communication, safety and lighting by train guards, shunters and signalmen, as well as station staff in the late 1880s to the early 1900s. They were hand operated and used fuel such as kerosene.The three railway signalling lamps have local significance as a set donated by a resident of Wodonga who worked for the Victorian Railways, as well as national significance as examples of the communication and safety equipment used by the railways in Australia in the late 19th century and early 20th century.Set of three painted black metal and glass railway signal lamps used for various purposes during train journeys. The largest signal lamp has circular blue and red glass filters and a turning mechanism on the top under the handle. "A y" on a small copper plate on one side of the largest signal lamp - Lamp 1.railway lamps, signalling lamp, train signal lamps -
Wodonga & District Historical Society Inc
Functional object - Victorian Railways Lamp, c. 1970s
... lamp was used by train guards in the Victorian Railways... lamp was used by train guards in the Victorian Railways ...This type of rectangular dark blue painted metal railway lamp was used by train guards in the Victorian Railways in the 20th century for communication, safety and lighting. It is the same type as the lamp attached to the Victorian Railways guard's leather satchel dated to the 1970s, registration WHS 00074 on Victorian Collections online.The Victorian Railways lamp has local significance as it was donated by a resident of Wodonga, as well as state significance as an example of communication and safety equipment used by the Victorian Railways employees in the 20th century.Rectangular dark blue painted metal lamp with a large handle on the top and a circular glass disk in front of a green filter. The initials 'V.R.' are embossed on the top and both sides. White metal/aluminium rim around the clear glass disk."V.R." on the top and both sides.victorian railways lamps, v.r. lamps, vr lamps, victorian railways guard's lamp, victorian railways equipment -
Orbost & District Historical Society
ticket voucher book, Victorian Railways Commission, c. 1939 - 1987
... and be issued with this ticket. The train guard may have issued... with this ticket. The train guard may have issued these tickets. This item ...A ticket voucher book used on the railway line between Bairnsdale and Orbost which closed in 1987. Escept for special events, passenger trains ceased in 1937 and after that time, passengers wishing to travel by train had to take the good trains and be issued with this ticket. The train guard may have issued these tickets.This item is associated with the history of the Orbost-Bairnsdale railway line and therefore reflects the role that the rail line played in the social and economic history of Orbost.A Victorian Railways ticket voucher book. This is a tear-off ticket book, stapled at the left margin. It was used for passengers travelling on goods trains from Bruthen Railway Station.TR88 Victorian Railways BRUTHEN 6879 STATION 7/1/1939. In consideration of my being able to travel by the ......goods train on the 7/1/39 from BRUTHEN 6879 to NOWA NOWA, I hereby unertake ........................... etc.railway-history orbost-bairnsdale-railway-line -
Orbost & District Historical Society
signal lamps
... of this kind were hand signalling lamps used by train guards, shunters... lamps of this kind were hand signalling lamps used by train ...Possibly used in the Orbost district. Railway lamps of this kind were hand signalling lamps used by train guards, shunters and sometimes signalmen and station staff. They could signal the locomotive crew at night to let them know what to do (move forward/move backward/right-of-way) when leaving a station, goods yard or siding. Railway lamps of this kind were significant railway items in their period of use as essential tools to the safe-working operations of the railway. Two railway signal lamps. These are kerosene burning lamps made of metal and painted red. Both lamps have carrying handles at the top. .1 has a green glass lens and .2 has a red glass lens. signals lamps communication railway transport kerosene-burning -
Tatura Irrigation & Wartime Camps Museum
Photograph, Train watching at Barmera SA, 1989 copy
... to the Loveday Camps at Barmera South Australia. The train and guards.... Several men "guards" standing in the foreground. This was a train ...This was a train that brought internees and POW's to the Loveday Camps at Barmera South Australia. The train and guards are preparing to depart, south of Barmera.Black and white photograph. Train extended full width of the photograph. Several men "guards" standing in the foreground.internees, pow's, loveday camp, internee camps south australia, pow transportation, barmera sa -
Melbourne Tram Museum
Newsletter, Public Transport Workers Association, "Sparks - the Paper of the Public Transport Workers Association - No. 11 Dec. 1987", Dec. 1987
... on strike by car cleaners at Dynon rail depot, replacement of train... rail depot, replacement of train guards and tram conductors ...Newsletter, A5 centre stapled, 12 pages, December 1987, titled "Sparks - the Paper of the Public Transport Workers Association - No. 11 Dec. 1987" as a Special Strike Issue. Reports on strike by car cleaners at Dynon rail depot, replacement of train guards and tram conductors, guards on strike, how to survive while on strike, a "letter" (tongue in cheek) from the Premier to the Transport Minister, in the form of an exam, dispute with management at Dynon. Covers the proposal to remove over 800 jobs at the Tram and Bus Division, Connies, maintenance, revenue clerks, operational inspectors, tram drivers and bus drivers, Port Melbourne light rail conversion See also Reg item 1395 and 2963 for other similar documents.trams, tramways, unions, light rail, conductors, disputes, railways, preston workshops, the met, light rail -
Otway Districts Historical Society
Photograph, R. Preston, McDevitt: Loco 14A passes through, 21 March 1959
... on a rare NA-hauled eight excursion carriage and NC guard's van... excursion trains ran, with carriages and an NC guard's van, usually ...In February 1959 eight NBH carriages were tranfered from storage at Newport to Colac in time for the first tentatively organized trip over the Colac-Beech Forest railway line. Eventually seventeen excursion trains ran, with carriages and an NC guard's van, usually hauled by G41 or G42, but occasionally 14A locomotive. The train run by 14A ran soon after the carriages were delivered.B/W. At McDevitt station locomotive 14A passes through on a rare NA-hauled eight excursion carriage and NC guard's van train. The front of the engine is labelled "The Ridge; 21 M(arch) 1959; ARHS", the Australian Railways Historical Society.colac; beech forest; railways; mcdevitt; -
The Beechworth Burke Museum
Photograph
Taken some time between 1914-18, depicted is a large group of unidentified males. Four of them are dressed in Australian military uniforms. The remaining 19 men are dressed in striped uniforms. The male in the centre of the front row is cradling a football, suggesting that the group was part of a football or rugby league team. It is believed that the soldiers in this photograph were part of the Australian Imperial Force. This can be inferred by the chevron rank insignia visible on their uniforms. The placement of this insignia on the sleeve of the right arm suggests that this soldier was either a Warrant Officer or a Non-Commissioned Officer (NCO). Additionally, they are also wearing 'Rising Sun' collar badges on their coats. Australia, unlike most other Commonwealth countries, did not adopt metal regimental badges during the First World War. All units were issued with the Australian Army General Service Badge, better known as the 'Rising Sun’ badge. This insignia is almost always identified with the Australian Imperial Force. Sport has always been entwined with war. Both sport and war demand peak physical fitness, camaraderie, strategy, and allegiance to a team collaboratively working towards a common goal: to win. The connection between sport and war is especially strong in Australia since these two concepts form the basis of our national identity. The Australian War Memorial has a number of World War I recruitment posters linking war and sport in its collection. One of the posters produced in 1915 by the State Parliamentary Recruiting Committee in Victoria attempted to shame young men into enlisting by juxtaposing the image of an Australian soldier standing guard over his deceased mate with a photograph of a Victorian Football League match. Another poster, produced in 1917, features vignettes of different sports including cricket, bowling, boxing, kayaking and golf. Its slogan reads, "Join Together - Train Together - Embark Together - Fight Together: Enlist in the Sportman's 1000".The record is historically significant due to its connection to World War I. This conflict is integral to Australian culture as it was the single greatest loss of life and the greatest repatriation of casualties in the country's history. Australia’s involvement in the First World War began when the Australian government established the Australian Imperial Force (AIF) in August 1914. Immediately, men were recruited to serve the British Empire in the Middle East and on the Western Front. The record has strong research potential. This is due to the ongoing public and scholarly interest in war, history, and especially the ANZAC legend, which is commemorated annually on 25 April, known as ANZAC Day. Additionally, the record presents a unique opportunity to further explore the relationship between the arts, sport and war. This statement of significance has already established that war is integral to Australia's national identity - and sport is of equal importance. Specifically, the record begs to question how the peak physical fitness and camaraderie valued in team sports were creatively translated into military recruitment campaigns during World War I. Evidently, this record and its historic context demonstrates that there is potential here, and if further research is completed on this topic, it may provide insight into Australian military recruitment tactics used in the past and present, and into the future.Sepia rectangular photograph printed on matte photographic paper mounted on card.Reverse: 6529 / hyossest (?) / (?)1/11/1 /military album, army, military, war, wwi, world war i, sport, football, rugby, aif, australian imperial force -
Upper Yarra Museum
Negative Photographic Reproduction, Three Bridges Railway station, 14.2.1983
The steam train "Powellite" at three bridges station pushing a flat top and guards/passenger carriage to Powelltown, there is a load of flour in bags and extra passengers on the flat topThree Bridges Railway station Negative Black white Scanned at 600 dpi.three bridges railway station steam train powellite a ross -
Australian Commando Association - Victoria
Pamphlet, Unknown, Unveiling ceremony Commando Commemorative cairn Tidal River 15 November 1964, 1964
This was the "Order of service" for the inaugural unveiling of the WW2 Commando Cairn at Tidal River, Victoria. Lt General Sir Edmund Herring, Lt Governor of Victoria addressed the assembly, 2 Commando Company soldiers were the Guard of Honour, and the 4/19 PWLH Regt band played. This was the first official memorial to WW2 Commandos, located at Wilsons Promontory where the Commando units were first trained. A memorial ceremony is held in November each year since 1964. Honour rolls of WW2 and post-WW2 Commandos who died in battle or training were added in 2011.2 sheet quarto (four sides) white semi-glossy paper with black type and logo. Order of service.Niltidal river wilsons promontory commando memorial cairn ww2 honour rolls post-ww2 national -
Tatura Irrigation & Wartime Camps Museum
Photograph - copy, D. Clark, Royal Visit 1954, 1989 copy
Copy of photograph of Royal couple boarding train at Tatura Railway Station. Cr and Mrs Brewer, Station Master Mr Kelly and a guard in picture.Black and white copy of photograph of Queen Elizabeth 11 on board Royal train, Prince Phillip still on station.on back: Royal Visit 1954royal visit -
Tatura Irrigation & Wartime Camps Museum
Knitting needles, 1940(Approx.)
Made by Internees at Camp 3 Tatura for Metz twins from wire surrounding the camp.Maia and her twin sister,aged 18 trained as nurses at Mooroopna Hospital with an armed guard beside them at all times.Both girls were keen on craftwork hence the need for knitting needles and the ingenuity to make them.Two knitting needles,pair,wire,with cork on one end of each needleknitting, camp 3, tatura, internees, nurses, handcrafts, eilene ubergang -
Tatura Irrigation & Wartime Camps Museum
Photograph, German Kormoran Survivors
Survivors from the German Auxiliary Cruiser Kormoran being marched off the Fremantle wharf under guard.historicBlack and white photograph of the side of a ship on the left, some people, a train and carriages and a small hutkormoran, german auxiliary cruiser kormoran, fremantle wharf, german survivors -
Puffing Billy Railway
Bucket, Train Sand
... carried in the guards van of a train and was used to sand... in the guards van of a train and was used to sand the rails when ...Train Sand Bucket The Train Sand Bucket was usually carried in the guards van of a train and was used to sand the rails when required to provide traction for the locomotive to haul its load up steep grades.Historic - Railways - Train Sand BucketTrain Sand Bucket made of metal puffing billy, train sand bucket -
Puffing Billy Railway
Equipment - Railway carriage (pbr Rinadeena No.2nal) ( Mt. Lyell Mining & Railway Company No.02), 1901–1902
2 NAL - Rinadeena - (Mt. Lyell) O 2; 2 NBL - 1st. class saloon car (20) NAL FIRST-CLASS SALOON CAR. Four saloon end-platform cars originally built during 1901–1902 by the Lancaster Railway Carriage and Wagon Company Ltd. for the 3'6" gauge Mt. Lyell Mining & Railway Company in Tasmania and classed O. Converted for use as second-class cars on the 2'6" gauge Puffing Billy Railway during 1965–1966, these cars were reclassified NBL and numbered 1–4. The L recognises their Mt. Lyell origin, No. 1 was kept for use as the Railway's VIP car and was reconditioned to a higher standard. No. 2 was similarly upgraded in 1985 for use on special occasions. In 1989 No. 3 was similarly reconditioned with No. 4 receiving similar treatment in 1995. These cars were re-classified NAL in recognition of their new first-class nature. The Mt Lyell Railway was closed in 1963 and subsequently dismantled, but fortunately several of the locomotives and carriages passed into preservation. Purchased by the Puffing Billy Preservation Society from the Mount Lyell Mining & Railway Company in the 1960's and converted to 2' 6" gauge. It has since given many years of service on the Puffing Billy Railway. TASMANIAN CARRIAGES & GUARDS VANS No. Builder Type Year built Ex. Location Note NAL 1 Lancaster Railway Carriage and Wagon Co Saloon 1901 Mt Lyell Railway Named Mt Lyell NAL 2 Lancaster Railway Carriage and Wagon Co Saloon 1901 Mt Lyell Railway Named Rinadeena NAL 3 Lancaster Railway Carriage and Wagon Co Saloon 1901 Mt Lyell Railway Named Teepookana NAL 4 Lancaster Railway Carriage and Wagon Co Saloon 1901 Mt Lyell Railway Named Dubbil BarrilThe Rinadeena is a stunning example of a classic narrow gauge 1st Class Saloon Carriage, used as a luxury edition to train travel in the late 1800s and the 2NAL within Puffing Billy's collection was purchased by the Puffing Billy Preservation Society in the 1960s, where it underwent restoration to become part of the railway's historic transport collection.A timber and iron saloon car - painted in crimson with a name plate 'Rinadeena' attached to the centre of the carriage and the words '2 NAL' painted in white directly below. The word 'FIRST' is painted in gold at both ends of the carriage. The car has nine windows on either side of the carriage and a wrought iron ballastrade upon entry at eiether end of the carriage as well as iron steps to ascend. Inside the carriage are 10 bench seats made of wood and leather and ten tables for dining. The windows are adorned with cream cloth fabric and above each bench are wrought iron luggae racks. The ceiling is covered in cloth and features two suspended ornate glass and metal light fixtures. A wooden door with two glass panels can be found at both ends of the carriage.2 NAL - Rinadeenarailway carriages, first class saloon, narrow gauge, rinadeena, mt lyell, transport, travel, leisure, luxury -
Puffing Billy Railway
Equipment - Stretcher
... carried in all Guards Vans on Victorian Railway trains, for use ...Railway stretchers were carried in all Guards Vans on Victorian Railway trains, for use when an accident occurred. Regular training and annual events in first aid competitions ensured most staff were well versed in the requirements of an emergency. Historic - Victorian Railways - First aid stretcher Timber stretcher, two beams encased in canvas with extendable metal straps.VICTORIAN RAILWAYS 513 / SUBURBAN TRAIN FLINDERS STREETrailway stretcher, victorian railways, puffing billy, first aid stretcher, suburban trains, flinders street, guards van, health and safety -
Puffing Billy Railway
1 NBC - Combined Second-Class Passenger Car And Guard's Van, 4/ 2/1899
Van 1 NBC - 1 compartment and van (7 & 4 ton capacity) - awaiting Restoration Vehicle Length 25 feet 2 inches ( 7671 mm) Coupled Length 27 feet 4 inches (8330 mm) Width 6 feet 3 inches (1905 mm) Weight 10 tons Capacity 7 passengers, 4 tons of goods Built 1898 - 1910 Number Built 7 In use NBC 2 To be restored NBC 1 & 6 VR Service History NBDBD 1.VA - 4/ 2/1899 NWS Built new - circa 1910 - To NBC 1.VA - *NBC 1.VA - / 4/1926 - Modified AC Malco 5/ 7/1937 NWS Into Workshops - 16/ 7/1937 NWS Out of Workshops (12 days) 13/ 3/1941 NWS Into Workshops - 5/ 4/1941 NWS Out of Workshops 24 days / 1/1954 - Sold (to) - circa 1955 CAC Body (v) / /1995 EME Note in Workshops Historic - Victorian Railways Narrow Gauge - Passenger Rolling Stock: Passenger and Guard's Van carriage. Used on first official train between Wangaratta and Whitfield in 1899.1NBC - Combined Second-Class Passenger Car And Guard's Van. - Made of Timber on a Wrought iron frame 1NBC - 1 compartment and van (7 & 4 ton capacity) - awaiting Restoration1 NBC puffing billy, 1nbc, 1nbc - combined second-class passenger car and guard's van, victorian railways, narrow gauge passenger and guard's van rolling stock, 2'6" guage -
Puffing Billy Railway
5 NBD, June 1901
NBD This is a Puffing Billy Railway reclassification of the first series of NB carriages. COMBINED NB PASSENGER CAR AND GUARD'S VAN. A saloon or end platform NB which has had a guard's compartment temporarily added in one end. Due to the temporary nature of this conversion, this vehicle also retains its original number in the NB numbering sequence but is classed NBD to differentiate it from the standard NBC and the NAC. The use of the letter 'D' in the classification is recognising the code for guard's vans prior to 1910. NB Class - Number Built (1st Series) 6 - Number Built (2nd Series) 17 - Number Built (3rd Series) 4 NB (1st series) NB 5 was equipped with a vertical hand brake at one end to enable it to be used as the last vehicle of a train. Body Length 20 feet 6 inches ( 6248 mm) Vehicle Length 25 feet 2 inches ( 7671 mm) Coupled Length 27 feet 4 inches (8330 mm) Width 6 feet 3 inches (1905 mm) Height 9 feet 5 inches (2870 mm) Weight 8 tons Capacity 16 passengers Built 1898 - 1904 Number Built 6 In use NBD 1, 2, 5 NB - Puffing Billy Railway classed these as NBD to indicate their use as a trailing vehicle with guard's accommodation. 5 NBD Victorian Railways Service History NBB 5. ( it's original number ) Built new - - / 6/1901 Newport Workshops 4/ 2/1902 - In Service "Commenced running" circa 1910 - renumbered To NB 5 *NB 5. - / 6/1926 - Modified AC Malco 5/ 2/1951 - Scrapped - Body and underframe purchased by Puffing Billy Preservation Society from Pakenham. Restored by the Puffing Billy Preservation Society 1975. In July 2006 work commenced on 5 NB to make it a temporary kitchen car for the luncheon/dinner train. It has had the seating removed from the saloon and kitchen equipment installed. Plans are for a kitchen car to be constructed and 5 NB restored to carry passengers.Historic - Victorian Railways Narrow Gauge - Passenger Rolling Stock: Passenger and Guard's Van carriage 5 NBD - converted into Catering Car and Guards vanMade of Timber and steel 5NBDvictorian railways, narrow gauge rolling stock, 5nbd - catering car and van, puffing billy -
Puffing Billy Railway
NSWTD Railway Marker Oil lamp, No.1 RA
NSWTD Railway Marker OIl lamp, No.1 RA Oil burning lamps have always been an important part of Australian railway signalling systems and have been used for communication, safety and lighting. It is called a marker lamp and was hung on rolling stock (carriages and wagons) such as the guard’s van to indicate the rear of the train at night. They were also used to indicate the rear of steam locomotive tenders for identification and safety purposes. This type of lamp was introduced to the railways around 1860 and continued to be used for over one hundred years. Oil lamps were phased out on the railways during the late 1960s and early 1970s, when they were replaced by battery lamps. Railway lighting included not only stations but yards, engines, rolling stock, signals, signal-boxes and crossings. There were a number of different types of lamps used for a variety of railway purposes. Historic - New South Wales Transport Department.- Railway Marker Oil Lamp NSWTD Railway Marker lamp, No.1 RA made of metal and Glass Railway lamp, paraffin, metal/glass/fabric, used for attaching to railway rolling stock to mark the end of the train, made by the New South Wales Transport Department, Sydney, New South Wales, Australia, 1870 - 1970 This lamp comprises a hollow cube of metal. One lens at the front transmits light from an interior light source. Fuel was either signal oil or kerosene. The burner inside the lamp used either cotton or felt wicks to create the light source. The lamp has a carry handle for carrying by hand and a bracket with a slot on the back for hanging onto the hook of a locomotive or item of rolling stock. It is marked "NSWTD" which stands for New South Wales Transport Department.NSWTD 1 RApuffing billy railway , pbr, nswtd railway marker oil lamp, no.1 ra -
Puffing Billy Railway
Four NSWTD Railway marker Oil lamps
Four NSWTD Railway marker Oil lamps at Nobelius Packing shed Item stamped numbers unknown Oil burning lamps have always been an important part of Australian railway signalling systems and have been used for communication, safety and lighting. It is called a marker lamp and was hung on rolling stock (carriages and wagons) such as the guard’s van to indicate the rear of the train at night. They were also used to indicate the rear of steam locomotive tenders for identification and safety purposes. This type of lamp was introduced to the railways around 1860 and continued to be used for over one hundred years. Oil lamps were phased out on the railways during the late 1960s and early 1970s, when they were replaced by battery lamps. Railway lighting included not only stations but yards, engines, rolling stock, signals, signal-boxes and crossings. There were a number of different types of lamps used for a variety of railway purposes. Historic - New South Wales Transport Department.- Railway Marker Oil LampFour NSWTD Railway marker Oil lamps made of metal and glass Railway lamp, paraffin, metal / glass / fabric, used for attaching to railway rolling stock to mark the end of the train, made by the New South Wales Transport Department, Sydney, New South Wales, Australia, 1870-1970 This lamp comprises a hollow cube of metal. One lens at the front transmits light from an interior light source. Fuel was either signal oil or kerosene. The burner inside the lamp used either cotton or felt wicks to create the light source. The lamp has a carry handle for carrying by hand and a bracket with a slot on the back for hanging onto the hook of a locomotive or item of rolling stock. It is marked "NSWTD" which stands for New South Wales Transport Department.NSWTDpuffing billy railway , pbr, four nswtd railway marker oil lamps -
Stawell Historical Society Inc
Photograph, Crowlands Railway 1953
... Guards Van and train carriages at Crowlands 16/12/1953... grampians Photograph Crowlands Railway 1953 Guards Van and train ...Guards Van and train carriages at Crowlands 16/12/1953transport, railways -
Hume City Civic Collection
Photograph, Rail accident, 1952
... train on the rail line. The guard, A.C Read, in the stationary... train on the rail line. The guard, A.C Read, in the stationary ...The train smash occurred in Sunbury between the Station Street level rail crossing and Sunbury Station on February 6th 1952 at around 10pm. The goods train was being pulled by the green locomotive, which was used to take the Jubilee train throughout Victoria in 1951, to acknowledge 125 of European settlement in Victoria, ran into the back of another stationary goods train on the rail line. The guard, A.C Read, in the stationary goods train was killed. P J Mcwhirter, the guard in the other train was injured. The tree lined street in the background is Horne Street.This smash was one of a number that have happened along the Sunbury rail line and in the vicinity of Sunbury Station over the years.A black and white photograph with a white border of a train smash which wrecked a steam engine and carriages. Workmen are on the tracks surveying the wreckage. A rail crossing is in the background.jubilee train, train crashes, station street, sunbury railway station, a c read, p j mcwhirter -
Surrey Hills Historical Society Collection
Photograph, Mr James de Graaf, 1929
Mr James de Graaf in 1929 with his 1925 T FORD. James’ father Jacobus de Graaf arrived in Melbourne from Holland in 1853 and married Eliza Twite, aged 16 years. James married Caroline Kink in 1885 and came to live at 13 Charles Street, near Elgar Road soon after. James rode to and from work in Richmond until the train timetables were suitable for his work schedule. He then would put his bicycle in the guards van and from Richmond would still have to ride a distance. Eventually he worked in the timber trade in Box Hill. One of his recreations was the training of gun-dogs and he also boarded gun-dogs for some local owners. A black and white photograph of a man standing in front of a Ford motor car. He is wearing a 3 piece suit and and a hat. The registration no. of the car is 9743.(mr) james de graaf, motor vehicles, (mr) jacobus de graaf, (miss) eliza twite, (miss) caroline kink, model t ford, charles street, mont albert, surrey hills, dogs -
8th/13th Victorian Mounted Rifles Regimental Collection
Photograph - 13th LH camp guard
Regimental guard from D Squadron 13th Light Horse at Torquay Camp 1940. The regiment was raised as 13th Light Horse (Gippsland), a Citizen Forces unit following WWI, and trained as a cavalry regiment till August 1940, when it converted from horse to mechanised initially as 13th Motor Regiment then 13th Armoured Regiment. It trained in Victoria and, as the Japanese threat to the mainland declined, was disbanded in October 1943 with men going to other units.Two black and white photographs of troop of Lighthorsemen about to mount guard in camp at Torquay 1940.13th, light horse, torquay -
Flagstaff Hill Maritime Museum and Village
Equipment - Rocket Launcher, John Dennett, 1860s
This rocket launching machine is used in conjunction with the Dennett Rocket Set. Both are part of the rocket rescue equipment that launches the line-throwing rescue rockets. A light line is threaded through the carved holes in the 8 foot long shaft and attached to the scribed channel at the base of the shaft. The rocket head is fitted to the shaft and inserted into the machine. The machine is set at an angle determined by the person in charge of the rescue crew, and the legs and base of the machine are adjusted accordingly with the use of the quadrant, or protractor, and plumb-bob on the side of the machine. The rocket is then ignited and fired across the vessel in distress. John Dennett - John Dennett was from Carisbrooke, in the Ilse of Wight, UK. In 1826 he invented, patented and demonstrated an improved method of rocket powered, line firing rescue equipment for saving lives. The rockets had a longer range than the mortars being used, they were lighter, needed less preparation time, only needed one line for repeated shots, and fewer people were needed to move the equipment. Very favourable reports of Dennett’s rockets were received by those in charge of His Majesty’s Naval and Military services. In 1832, Dennett’s rocket-thrown line was sent out to the wreck of the ‘Bainbridge’, and was responsible for nineteen survivors coming ashore in two boatloads, along the fired line. Dennett’s rocket received national fame, and a one-year contract to supply rockets to the Coastguards. He became known as ‘Rocket Man’ and his rockets were used in rescues at least until 1890, when his son Horatio was running the business. A rocket weighing 23 lb would have a range of about 250 yards (228 metres), on average. Saving lives in Warrnambool – The coastline of South West Victoria is the site of over 600 shipwrecks and many lost lives; even in Warrnambool’s Lady Bay there were around 16 known shipwrecks between 1850 and 1905, with eight lives lost. In 1859 the first Government-built lifeboat arrived at Warrnambool Harbour and a shed was soon built to house it. In 1858 the provision of rocket and mortar apparatus was approved for lifeboat stations in Victoria, and in 1864 a rocket house was built to safely store the rocket rescue equipment. In 1878 the buildings were moved to the Breakwater area, and in 1910 the new Lifeboat Warrnambool arrived with its ‘self-righting’ design. For almost a hundred years the lifeboat and rocket crews, mostly local volunteers, trained regularly to maintain their rescue skills. They were summoned when needed by alarms, gunshots, ringing bells and foghorns. Some became local heroes but all served an important role. By the end of the 1950s the lifeboat and rescue equipment had become obsolete. Rocket Rescue Method - The Government of Victoria adopted lifesaving methods based on Her Majesty’s Coast Guard in Great Britain. It authorised the first line-throwing rescue system in 1858. Captain Manby’s mortar powered a projectile connected to rope, invented in 1808. The equipment was updated to John Dennett’s 8-foot shaft and rocket method that had a longer range of about 250 yards. From the 1860s the breeches buoy and traveller block rocket rescue apparatus was in use. It was suspended on a hawser line and manually pulled to and from the distressed vessel carrying passengers and items. In the early 1870s Colonel Boxer’s rocket rescue method became the standard in Victoria. His two-stage rockets, charged by a gunpowder composition, could fire the line up to 500-600 yards, although 1000 yards range was possible. Boxer’s rocket carried the light line, which was faked, or coiled, in a particular way between pegs in a faking box to prevent twists and tangles when fired. The angle of firing the rocket to the vessel in distress was measured by a quadrant-type instrument on the side of the rocket machine. Decades later, in about 1920, Schermuly invented the line-throwing pistol that used a small cartridge to fire the rocket. The British Board of Trade published instructions for both the beach rescue crew and ship’s crew. It involved setting up the rocket launcher on shore at a particular angle measured by the quadrant, inserting a rocket that had a light-weight line threaded through its shaft, and then firing it across the stranded vessel, the line issuing freely from the faking board. A tally board was then sent out to the ship with instructions in four languages. The ship’s crew would haul on the line to bring out the heavier, continuous whip line, then secure the attached whip block to the mast or other sturdy part the ship. The rescue crew on shore then hauled out a stronger hawser line, which the ship’s crew fixed above the whip block. The hawser was then tightened using the block on the shore end of the whip. The breeches buoy and endless whip are then attached to the traveller block on the hawser, allowing the shore crew to haul the breeches buoy to and from the vessel, rescuing the stranded crew one at a time. This rocket launcher machine is significant for its connection with local history, maritime history and marine technology. Lifesaving has been an important part of the services performed from Warrnambool's very early days, supported by State and Local Government, and based on the methods and experience of Great Britain. Hundreds of shipwrecks along the coast are evidence of the rough weather and rugged coastline. Ordinary citizens, the Harbour employees, and the volunteer boat and rescue crew, saved lives in adverse circumstances. Some were recognised as heroes, others went unrecognised. In Lady Bay, Warrnambool, there were around 16 known shipwrecks between 1850 and 1905. Many lives were saved but tragically, eight lives were lost.Rocket launcher, named a Rocket Machine, and storage box. Launcher has a long open metal channel with a spike at the base, and narrow, rectangular device, which is the line-firing rocket machine, at the top, all painted blue. Two hinged wooden legs are attached where the channel and machine meet. The side of the machine has an oval cut-out window and an attached quadrant, or protractor, with a plumb-bob on it. The quadrant has angles marked in degrees. The long protective box has white stencilled letters along the side. Its lid has three hinges and is fastened with two metal latches.On box “ROCKET MACHINE” On quadrant “10” “20” “30” “40”flagstaff hill maritime museum & village, flagstaff hill, maritime museum, maritime village, warrnambool, great ocean road, shipwreck, life-saving, lifesaving, rescue crew, rescue, rocket rescue, maritime accidents, shipwreck victim, rocket crew, beach rescue, line rescue, rescue equipment, rocket firing equipment, rocket rescue equipment, rocket apparatus, beach apparatus, petticoat breeches, breeches buoy, rocket house, rocket shed, lifeboat men, rocket equipment, rocket machine, rocket head, rocket launcher, rocket line, marine technology, william schermuly, line-firing pistol, line throwing gun, schermuly pistol, pistol rocket apparatus, beach rescue set, traveller, block, running block, pulley, hawser, faking, faking box, faked line, rescue boat, lifeboat, lady bay, warrnambool harbour, port of warrnambool, tramway jetty, volunteer lifesavers, volunteer crew, breakwater, lifeboat warrnambool, rocket rescue method, rocket rescue apparatus, captain manby, mortar, henry trengrouse, sky rocket, john dennett, shore to ship, colonel boxer, two-stage rocket, italian hemp, quadrant, protractor, schermuly, line-throwing pistol, line throwing cartridge, rocket apparatus rescue, stranded vessel, tally board, light line, whip line, endless whip, petticoat buoy, traveller chair, traveller block, her majesty’s coast guard, harbour board, line thrower, line throwing, beach cart, hand barrow, sand anchor, hawser cutter, life jacket, faking board, welsh hand barrow, rocket set